The SuperSprint - Specification
Model | SuperSprint 30 | SuperSprint 32/165 |
Work capacity
Bar diameter maximum | 32mm (collet) | 32mm (in 3 jaw chuck but not below 5mm) |
Turning length maximum | 265mm | 235mm |
Chuck specification | Option of 170mm closed centre | 165mm through hole chuck standard |
Chuck actuation | Pneumatic (max speed 3000 rpm) | Hydraulic, separate power pack |
Spindle
Spindle nose mounting | A2.4 in. | A2.4 in. |
Collet system | T980 Multibore | Not applicable |
Hole through spindle | 42mm | 42mm |
Front bearings | 2 angular contact | 2 angular contact |
Rear bearings | 2 angular contact | 2 angular contact |
Spindle drive
Speed range | 60 - 4000 rpm | 72 - 4800 rpm |
Power | 6.45kw continuous, 11kw peak | 6.45kw continuous, 11kw peak |
Drive type | Direct poly vee belt | Direct poly vee belt |
Platen slide, X axis
Slide travel | 440mm | 440mm |
Feedrate range | 0 - 3000mm/min | 0 - 3000mm/min |
Rapid traverse rate | 8000mm/min | 8000mm/min |
Drive type | Ballscrew and DC Servo motor | Ballscrew and DC Servo motor |
Z axis slide
Slide travel | 265mm | 265mm |
Feedrate range | 0 - 3000mm/min | 0 - 3000mm/min |
Rapid traverse rate | 8000mm/min | 8000mm/min |
Drive type | Ballscrew and DC Servo motor | Ballscrew and DC Servo motor |
Platen tooling
Tool section, turning | 20 x 20mm max | 20 x 20mm max |
Bore work toolholders | 25mm dia. bore | 25mm dia. bore |
Number of tools, typically | 6-10 | 6-10 |
Vertical slide (part off only) Optional extra Optional extra
Slide travel | 76mm | 76mm |
Feedrate range | 0 - 800mm/min | 0 - 800mm/min |
Rapid traverse rate | 6000mm/min | 6000mm/min |
Drive type | Hydraulic (air intensified) | Hydraulic (air intensified) |
Bar feed. Automatic
Emi-Mec pneumatic 3 metre bar | Standard | Optional |
ACROVU heavy duty pneumatic | Optional extra | Standard; with one liner |
Lubrication
Spindle bearings | Kluber greased for life | Kluber greased for life |
Slides and Ballscrews | Automatic multi-point | Automatic multi-point |
Coolant
Pump | Electric centrifuge type | Electric centrifuge type |
Flow rote maximum | 25 litres per min | 25 litres per min |
Capacity of tank | 75 litres | 75 litres |
Dimensions
Length, depth, height | 2300 x 1460 x 1600mm | 2300 x 1460 x 1600mm |
Weight | 1500kgs | 1650kgs |
Emi-Mec bar feed | Add 3600mm to length, | Add 3600mm to length, |
ACROVU bar feed | Add 5000mm to length, | Add 5000mm to length, |
Accuracy
X axis repeatability | 5 microns | 5 microns |
Diametral accuracy | 25 microns | 25 microns |
BOSCH CC100 T Control
Standard Specification
- 250mm monochrome green screen display
- Inch / metric switching
- Two RS232c. serial interfaces
- 32 k byte part programme storage
- Integral PLC, programmable on machine
- Parametric programming language
- ISO format programming
- Canned cycles; drill, thread, contour, roughing, grooving and peck drilling
- 17 contour cycles
- Tool length and radius compensation
- Comprehensive diagnostics
- 0 - 120% feed rate overide in 1 % increments
- 39 programmable cycles
- DNC drip feed
- Dynamic tool path simulation
- 7 zero shifts
- Soft key hierarchical operating control
- Linear and circular interpolation
- Handwheel for X and Z slide control
- Constant surface speed
- Graphic aided programming
- Tool life management
- English language (others available)
- 32 pairs of tool offsets
- Programmable manual function keys
- Built in calculator